COMMERCIAL HOOD INSTALLATION IN MARYLAND
Opening or renovating a commercial kitchen requires a properly engineered exhaust system. A poorly sized or incorrectly installed hood can fail your health inspection, stall your certificate of occupancy, or create a serious fire hazard.
CRS Hoods designs and installs commercial kitchen exhaust systems across Maryland, from initial ventilation design through the documentation your fire marshal will ask for at inspection.
Since 1980, CRS Hoods has installed more than 10,000 commercial kitchen exhaust systems across Pennsylvania, New Jersey, Delaware, and Maryland, with systems that consistently pass inspection on the first attempt.
OUR SERVICES IN MARYLAND
COMPLETE COMMERCIAL KITCHEN VENTILATION INSTALLATION SERVICES
CRS Hoods offers a full range of commercial kitchen exhaust installation services across Maryland. Every job is completed by certified technicians and backed by engineering documentation, permit support, and a final compliance walkthrough. Below is a full description of what we provide.
Custom Kitchen Hood Fabrication and Installation
We fabricate and install stainless steel exhaust hoods sized specifically for your cooking equipment, line layout, and kitchen footprint. Every hood is built with proper overhang, correct CFM ratings, and welded seams that meet NFPA 96 construction standards. We handle Type I hoods for grease producing equipment and Type II hoods for heat and steam applications, along with wall canopy, island canopy, and backshelf configurations depending on your kitchen layout.
Grease Duct Fabrication and Installation
The ductwork connecting your hood to the rooftop exhaust fan has to be built and installed correctly the first time, since it is largely inaccessible once the kitchen is finished out. CRS Hoods fabricates and installs continuously welded grease duct with proper clearance to combustibles, correct slope for grease drainage, and access panels placed exactly where code requires them. We plan duct routing around your building’s structural and mechanical constraints so the run is both compliant and efficient.
Exhaust Fan Installation and Startup
The rooftop or wall mounted exhaust fan is the engine that drives your entire ventilation system. CRS Hoods installs upblast and utility set exhaust fans sized to match your hood’s airflow requirements, mounts them on properly flashed curbs, wires them to your control panel, and performs full startup testing to confirm correct airflow, rotation, and static pressure before we leave the site.
Make-Up Air Unit Installation
A commercial kitchen exhaust system cannot function properly without a matched make-up air system to replace the air being pulled out of the building. CRS Hoods installs make-up air units sized to balance your exhaust CFM, reducing negative pressure, improving comfort for your staff, and preventing doors from sticking or heating and cooling systems from struggling. We coordinate tempered and untempered make-up air options based on your building’s mechanical setup.
Fire Suppression System Installation Coordination
NFPA 96 requires a listed fire suppression system installed above every piece of grease producing cooking equipment before your kitchen can open. Fire suppression coordination is handled with certified fire protection contractors, with nozzle placement aligned to your hood and duct installation so the exhaust and suppression work line up on the same schedule.
Kitchen Ventilation Design Support
Before a single weld is made, we take your equipment schedule and the drawings from your architect or general contractor and design a ventilation system that fits your equipment schedule, seating capacity, and building layout. CRS Hoods prepares mechanical drawings, CFM calculations, and specification sheets needed for permit submission, and we build every system to meet the requirements of the county health department reviewing your plans, whether that is Baltimore County, Anne Arundel, Montgomery, Prince George’s, Howard, or one of the Eastern Shore counties. Maryland reviews commercial kitchen plans county by county, so the package that clears one jurisdiction is not always what the next one asks for.
NFPA 96 Compliance Verification and Documentation
Every CRS Hoods installation concludes with a full compliance package. This includes final airflow test results, fabrication and material documentation for the system we built, photo documentation of hood, duct, fan, and make-up air installation, and a certificate of installation bearing the technician’s certification number. This documentation is emailed to you same day and can be provided to your fire marshal, health department, or insurance provider on request.
Not sure what your new or renovated Maryland kitchen requires?
A call with a CRS Hoods specialist will give you a clear answer on what your project requires.
WHY CHOOSE CRS HOODS
WHY MARYLAND KITCHENS WORK WITH A LICENSED HOOD FABRICATOR
Maryland has no shortage of contractors offering hood installation services. Here is why restaurant owners, general contractors, and developers across Maryland choose CRS Hoods for new construction and renovation projects alike.
Our Own Fabrication and Installation Crews
Every weld, every seam, and every mounting detail is done by CRS Hoods technicians trained specifically in commercial kitchen exhaust work.
Licensed to Do Hood Work in Maryland
Maryland requires an HVACR license to purchase and install a commercial hood system. CRS Hoods holds that license, so the fabrication, the equipment purchase, and the installation all sit with one licensed party. Contractors without it cannot legally complete the work, which is where Maryland projects most often stall.
Inspection-Ready Installation
We fabricate and install every system to meet the codes it will be inspected against. CRS Hoods prepares full documentation so your project keeps moving toward opening day.
Multi-Location Support
If you are building out several Maryland locations, our crews and scheduling scale to match your project timeline,with a single CRS Hoods point of contact for the hood, ductwork, and fire suppression scope we carry on every site.
UNDERSTANDING NFPA 96 COMPLIANCE FOR NEW INSTALLATIONS IN MARYLAND
The National Fire Protection Association sets strict construction and installation guidelines for commercial kitchen exhaust systems. These standards exist to reduce fire risk and keep new kitchens safe from the moment they open.
Key Installation Requirements:
- Correct hood sizing and overhang based on cooking equipment type
- Continuously welded ductwork with proper clearance to combustibles
- Exhaust fan airflow matched to hood CFM requirements
- Balanced make-up air to prevent negative building pressure
- Fire suppression system installed and inspected before opening
- Complete documentation for permitting, inspection, and insurance
CRS Hoods designs and installs every system to meet these standards from the ground up, helping you avoid delays, failed inspections, and rework.
FREQUENTLY ASKED QUESTIONS
What is commercial hood installation and why is it important?
Commercial hood installation is the design and construction of your kitchen’s exhaust system, including the hood, ductwork, exhaust fan, and make-up air unit. A properly installed system controls heat, smoke, and grease vapor while keeping your kitchen compliant with fire and health codes.
How long does a commercial hood installation take in Maryland?
It depends on the size of the system, how much fabrication your layout requires, the state of the building during buildout, and when permits and equipment land. We give you a realistic window once we have seen the site and the drawings.
Do I need a new hood for a kitchen renovation?
It depends on what is changing. New cooking equipment, a different line layout, or a shift in the type of cooking you do can each push an existing hood out of compliance on sizing, overhang, or airflow. CRS Hoods evaluates the existing system on site and tells you whether it can be modified or needs replacement.
What does CRS Hoods provide for my Maryland permit submission?
We prepare the mechanical documentation your permit package needs, including drawings, CFM calculations, and specification sheets built to meet Maryland building and health department requirements. Filing the permit and scheduling inspections stays with the owner or general contractor, since they control the project timeline.
Can you install fire suppression alongside the hood system?
Yes. Fire suppression coordination is handled with certified fire protection contractors so your entire exhaust system is completed and inspected together.
GET RELIABLE HOOD INSTALLATION IN MARYLAND TODAY
Opening a commercial kitchen should never be delayed by a mismatched or noncompliant exhaust system. CRS Hoods provides dependable commercial kitchen hood installation in Maryland that protects your staff, your customers, and your business from day one.